ZyXEL Communications XS3800-28 Cli Reference Manual page 156

MLD Snooping-Proxy
MLD snooping-proxy is a Zyxel-proprietary feature. IPv6 MLD proxy allows only one upstream interface on
a switch, while MLD snooping-proxy supports more than one upstream port on a switch. The upstream
port in MLD snooping-proxy can report group changes to a connected multicast router and forward
MLD messages to other upstream ports. This helps especially when you want to have a network that uses
STP to provide backup links between switches and also performs MLD snooping and proxy functions.
MLD snooping-proxy, like MLD proxy, can minimize MLD control messages and allow better network
performance.
In MLD snooping-proxy, if one upstream port is learned via snooping, all other upstream ports on the
same device will be added to the same group. If one upstream port requests to leave a group, all other
upstream ports on the same device will also be removed from the group.
In the following MLD snooping-proxy example, all connected upstream ports (1 ~7) are treated as one
interface. The connection between ports 8 and 9 is blocked by STP to break the loop. If there is one
query from a router (X) or MLD Done or Report message from any upstream port, it will be broadcast to
all connected upstream ports.
Report
42.2 Command Summary
The following table describes user-input values available in multiple commands for this feature.
Table 110 ipv6 User-input Values
COMMAND
interface-type
interface-number
Chapter 42 IPv6 Commands
Query
1
2
3
4
5
DESCRIPTION
VLAN. The Switch supports only the VLAN interface type at the time of writing.
A VLAN ID number.
Ethernet Switch CLI Reference Guide
X
9
8
7
6
Done
156