ZyXEL Communications XS3800-28 Cli Reference Manual page 258

Table 166 PPPoE Intermediate Agent Command Summary (continued)
COMMAND
no pppoe intermediate-agent
format-type access-node-
identifier
no pppoe intermediate-agent
format-type identifier-string
no pppoe intermediate-agent
format-type identifier-string
hostname
no pppoe intermediate-agent vlan
<vlan-list>
no pppoe intermediate-agent vlan
<vlan-list> circuit-id
pppoe intermediate-agent
pppoe intermediate-agent format-
type identifier-string hostname
pppoe intermediate-agent format-
type access-node-identifier
string <string>
pppoe intermediate-agent format-
type identifier-string string
<string> option
<s|p|v|sp|sv|pv|spv> delimiter
<#|.|,|;|/| |>
pppoe intermediate-agent vlan
<vlan-list>
pppoe intermediate-agent vlan
<vlan-list> circuit-id
pppoe intermediate-agent vlan
<vlan-list> remote-id
show pppoe intermediate-agent
show pppoe intermediate-agent
statistic
show pppoe intermediate-agent
statistic vlan <vlan-list>
Chapter 68 PPPoE IA Commands
DESCRIPTION
Removes the access-node-identifier you have set.
Removes the identifier-string you have set.
Sets the Switch to not add the Switch's host name to the
identifier-string.
Disables PPPoE IA for the specified VLAN(s).
Disables the PPPoE IA Circuit ID settings for the specified
VLAN(s).
Enables PPPoE Intermediate Agent (PPPoE IA) globally.
Sets the Switch to add the Switch's host name to the
identifier-string.
Sets the access-node-identifier string.
string: Enter up to 20 alphanumeric characters to identify
the PPPoE intermediate agent. Hyphens (-) and spaces are
also allowed. The default is the Switch's host name.
This command sets the following:
• a string that the Switch adds in the Agent Circuit ID
sub-option
• the variables to generate and add in the Agent Circuit
ID sub-option,
• a delimiter to separate the identifier-string, slot ID, port
number and/or VLAN ID from each other.
string: You can up to 63 printable characters. Spaces
are allowed.
option <s|p|v|sp|sv|pv|spv>: s, p and v indicate slot,
port, vlan, and sp, sv, pv and spv indicate combinations of
slot-port, slot-VLAN, port-VLAN and slot-port-VLAN
respectively. The Switch enters a zero into the PADI and
PADR packets for the slot value.
delimiter <#|.|,|;|/| |>: You can use a pound key
(#), semi-colon (;), period (.), comma (,), forward slash (/)
or a space.
Enables PPPoE IA for the specified VLAN(s).
Enables the PPPoE IA Circuit ID settings for the specified
VLAN(s).
Enables the PPPoE IA Remote ID settings for the specified
VLAN(s).
Shows the PPPoE IA settings.
Shows the statistics of PPPoE packets handled (received,
forwarded and dropped) by PPPoE IA on the Switch.
Shows the statistics of PPPoE packets for the specified
VLAN(s).
Ethernet Switch CLI Reference Guide
258
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 13
E 13
E 13