ZyXEL Communications XS3800-28 Cli Reference Manual page 28

Table 10 Command Summary: aaa accounting (continued)
COMMAND
no aaa accounting commands
show aaa accounting dot1x
aaa accounting dot1x <start-
stop|stop-only>
<radius|tacacs+> [broadcast]
no aaa accounting dot1x
show aaa accounting exec
aaa accounting exec <start-
stop|stop-only>
<radius|tacacs+> [broadcast]
no aaa accounting exec
show aaa accounting system
aaa accounting system
<radius|tacacs+> [broadcast]
no aaa accounting system
Table 11 aaa authorization Command Summary
COMMAND
show aaa authorization
show aaa authorization dot1x
show aaa authorization exec
aaa authorization console
aaa authorization dot1x radius
aaa authorization exec
<radius|tacacs+>
no aaa authorization console
Chapter 4 AAA Commands
DESCRIPTION
Disables accounting of command sessions on the Switch.
Displays accounting settings for recording IEEE 802.1x
session events.
Enables accounting of IEEE 802.1x authentication sessions
and specifies the mode and protocol method. Optionally,
sends accounting information for IEEE 802.1x
authentication sessions to all configured accounting
servers at the same time.
Disables accounting of IEEE 802.1x authentication sessions
on the Switch.
Displays accounting settings for recording administrative
sessions via SSH, Telnet or the console port.
Enables accounting of administrative sessions via SSH,
Telnet and console port and specifies the mode and
protocol method. Optionally, sends accounting
information for administrative sessions via SSH, Telnet and
console port to all configured accounting servers at the
same time.
Disables accounting of administrative sessions via SSH,
Telnet or console on the Switch.
Displays accounting settings for recording system events,
for example system shut down, start up, accounting
enabled or accounting disabled.
Enables accounting of system events and specifies the
protocol method. Optionally, sends accounting
information for system events to all configured accounting
servers at the same time.
Disables accounting of system events on the Switch.
DESCRIPTION
Displays authorization settings configured on the Switch.
Displays the authorization method used to allow an IEEE
802.1x client to have different bandwidth limit or VLAN ID
assigned via the external server.
Displays the authorization method used to allow an
administrator which logs in the Switch through Telnet or SSH
to have different access privilege level assigned via the
external server.
Enables authorization of allowing an administrator which
logs in the Switch through the console port to have
different access privilege level assigned via the external
server.
Enables authorization for IEEE 802.1x clients using RADIUS.
Specifies which method (radius or tacacs+) should be
used for administrator authorization.
Disables authorization of allowing an administrator which
logs in the Switch through the console port to have
different access privilege level assigned via the external
server.
Ethernet Switch CLI Reference Guide
28
M P
C 13
E 3
C 13
C 13
E 3
C 13
C 13
E 3
C 13
C 13
M P
E 3
E 3
E 3
C 14
C 14
C 14
C 14