ZyXEL Communications XS3800-28 Cli Reference Manual page 161

Table 115 ipv6 mld snooping-proxy Command Summary (continued)
COMMAND
ipv6 mld snooping-proxy 8021p-
priority <0-7>
ipv6 mld snooping-proxy filtering
ipv6 mld snooping-proxy filtering
profile <name> start-address <ip>
end-address <ip>
ipv6 mld snooping-proxy vlan
<vlan-id>
ipv6 mld snooping-proxy vlan
<vlan-id> downstream interface
port-channel <port-list>
ipv6 mld snooping-proxy vlan
<vlan-id> downstream interface
port-channel <port-list> fast-
leave-timeout <2-16775168>
ipv6 mld snooping-proxy vlan
<vlan-id> downstream interface
port-channel <port-list> leave-
timeout <2-16775168>
ipv6 mld snooping-proxy vlan
<vlan-id> downstream interface
port-channel <port-list> mode
<immediate | normal | fast>
ipv6 mld snooping-proxy vlan
<vlan-id> downstream query-
interval <1000-31744000>
ipv6 mld snooping-proxy vlan
<vlan-id> downstream query-max-
response-time <1000-25000>
ipv6 mld snooping-proxy vlan
<vlan-id> upstream interface port-
channel <port-list>
Chapter 42 IPv6 Commands
DESCRIPTION
Sets the default IEEE 802.1p priority in the MLD
messages.
Enables MLD filtering on the Switch.
Adds an MLD filtering profile and sets the range of the
multicast address(es).
Enables MLD snooping-proxy on the specified VLAN.
Specifies the downstream port(s) on the Switch. The
port(s) will work as a multicast router to send MLD
queries and listen to the MLD host's join and leave
messages.
Sets the fast leave timeout (in milliseconds) for the
specified downstream port(s).
This defines how many seconds the Switch waits for an
MLD report before removing an MLD snooping
membership entry (learned on a downstream port)
when an MLD Done message is received on this port
from a host.
Set the MLD snooping normal leave timeout (in
milliseconds) the Switch uses to update the forwarding
table for the specified downstream port(s).
This defines how many seconds the Switch waits for an
MLD report before removing an MLD snooping
membership entry (learned on a downstream port)
when an MLD Done message is received on this port
from a host.
Sets the leave mode for the specified downstream
port(s) in a specified VLAN.
This specifies whether Switch removes an MLD
snooping membership entry (learned on a downstream
port) immediately (immediate) or wait for an MLD
report before the normal (normal) or fast (fast) leave
timeout when an MLD leave message is received on
this port from a host.
Sets the amount of time (in milliseconds) between
general query messages sent by the downstream port.
Sets the maximum time (in milliseconds) that the Switch
waits for a response to a general query message sent
by the downstream port.
Specifies the upstream (host) port(s) on the Switch. The
port(s) will work as an MLD host to send join or leave
messages when receiving queries from the multicast
router.
Ethernet Switch CLI Reference Guide
161
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13