ZyXEL Communications XS3800-28 Cli Reference Manual page 47

Table 29 Command Summary: storm-control, bmstorm-limit, and bstorm-control (continued)
COMMAND
broadcast-limit <pkt/s>
no broadcast-limit
multicast-limit
multicast-limit <pkt/s>
no multicast-limit
dlf-limit
dlf-limit <pkt/s>
no dlf-limit
12.2 Command Example: bmstorm-limit
This example enables broadcast storm control on port 1 and limits the combined maximum rate of
broadcast, multicast and DLF packets to 128 Kbps.
sysname# configure
sysname(config)# storm-control
sysname(config)# interface port-channel 1
sysname(config-interface)# bmstorm-limit
sysname(config-interface)# bmstorm-limit 128
sysname(config-interface)# exit
sysname(config)# exit
12.3 Command Example: broadcast-limit, multicast-limit
& dlf-limit
This example enables broadcast storm control on the Switch, and configures port 1 to accept up to:
• 128 broadcast packets per second,
• 256 multicast packets per second,
Chapter 12 Broadcast Storm Commands
DESCRIPTION
Specifies the maximum number of broadcast packets the
Switch accepts per second on the specified port(s).
The Switch will generate a trap and/or log when the
actual rate is higher than the specified threshold.
Disables broadcast packet limit no the specified port(s).
Enables the multicast packet limit on the specified port(s).
Specifies the maximum number of multicast packets the
Switch accepts per second on the specified port(s).
The Switch will generate a trap and/or log when the
actual rate is higher than the specified threshold.
Disables multicast packet limit on the specified port(s).
Enables the DLF packet limit on the specified port(s).
Specifies the maximum number of DLF packets the Switch
accepts per second on the specified port(s).
Disables DLF packet limits no the specified port(s).
Ethernet Switch CLI Reference Guide
47
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13