ZyXEL Communications XS3800-28 Cli Reference Manual page 303

Table 192 stacking Command Summary (continued)
COMMAND
show running-config
show stacking slot <number>
show system-information
Stacking
no Stacking
Stacking priority <1-63>
Stacking force-master
no Stacking force-master
Stacking slot-id <current slot-
id> renumber auto
Stacking slot-id <current slot-
id> renumber <new slot-id>
reload stacking-default
81.3 Command Examples
Use show system-information to show current Switch stacking mode.
sysname# show system-information
Product Model
System Name
System Mode
System Contact
System Location
System up Time
Ethernet Address
Bootbase Version
ZyNOS F/W Version
Config Boot Image
Current Boot Image
RomRasSize
sysname#
Use the following procedure to create a stack:
Chapter 81 Stacking Commands
DESCRIPTION
Shows current Switch configuration including stacking slot
summary.
Press [CTRL]+C to terminate the process.
Shows stacking details for the specified slot.
Shows Switch stacking mode.
Enables stacking when the Switch is in standalone mode.
The Switch will automatically reboot with a new config01.
Enables standalone when the Switch is in stacking mode.
The Switch will automatically reboot with a new config01.
Sets switch stacking priority.
Enables force master mode which makes this Switch the
master in the stack.
Disables force master mode.
Sets selected slot to auto mode.
Sets selected slot to new slot ID.
Resets all configurations done since the change to
stacking mode except username and password back to
the original settings.
: XGS3700-48HP
: XGS3700
: Standalone
:
:
: 67:58:37 (e965d83 ticks)
: 00:19:cb:00:00:02
: V1.00 | 03/27/2013
: V4.20(AAGF.0)b4 | 08/12/2014
: 1
: 1
: 6550116
Ethernet Switch CLI Reference Guide
303
M P
E 3
E 3
E 3
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 13