ZyXEL Communications XS3800-28 Cli Reference Manual page 162

Table 115 ipv6 mld snooping-proxy Command Summary (continued)
COMMAND
ipv6 mld snooping-proxy vlan
<vlan-id> upstream last-listener-
query-interval <1-8387584>
ipv6 mld snooping-proxy vlan
<vlan-id> upstream query-interval
<1000-31744000>
ipv6 mld snooping-proxy vlan
<vlan-id> upstream query-max-
response-time <1000-25000>
ipv6 mld snooping-proxy vlan
<vlan-id> upstream robustness-
variable <1-25>
no ipv6 mld snooping-proxy
no ipv6 mld snooping-proxy
filtering
Chapter 42 IPv6 Commands
DESCRIPTION
Sets the amount of time (in milliseconds) between the
MLD group-specific queries sent by an upstream port
when an MLD Done message is received. This value
should be exactly the same as what's configured in the
connected multicast router.
This value is used to calculate the amount of time an
MLD snooping membership entry (learned only on the
upstream port) can remain in the forwarding table
after a Done message is received.
When an MLD Done message is received, the Switch
sets the entry's lifetime to be: last-listener-query-
interval x robustness-variable
Sets the amount of time (in milliseconds) between
general query messages sent by the router connected
to the upstream port. This value should be exactly the
same as what's configured in the connected multicast
router.
This value is used to calculate the amount of time an
MLD snooping membership entry (learned only on the
upstream port) can remain in the forwarding table.
When an MLD Report message is received, the Switch
sets the timeout period of the entry to be: query-
interval x robustness-variable + query-max-
response-time
Sets the amount of time (in milliseconds) the router
connected to the upstream port waits for a response to
an MLD general query message. This value should be
exactly the same as what's configured in the
connected multicast router.
This value is used to calculate the amount of time an
MLD snooping membership entry (learned only on the
upstream port) can remain in the forwarding table.
When an MLD Report message is received, the Switch
sets the timeout period of the entry to be: query-
interval x robustness-variable + query-max-
response-time
When an MLD Done message is received, the Switch
sets the entry's lifetime to be: last-listener-query-
interval x robustness-variable
Sets the number of queries. A multicast address entry
(learned only on an upstream port by snooping) is
removed from the forwarding table when there is no
response to the configured number of queries sent by
the router connected to the upstream port. This value
should be exactly the same as what's configured in the
connected multicast router.
This value is used to calculate the amount of time an
MLD snooping membership entry (learned only on the
upstream port) can remain in the forwarding table.
Disables IPv6 MLD snooping-proxy on the Switch.
Disables IPv6 MLD filtering on the Switch.
Ethernet Switch CLI Reference Guide
162
M P
C 13
C 13
C 13
C 13
C 13
C 13