ZyXEL Communications XS3800-28 Cli Reference Manual page 199

Chapter 50 MAC Authentication Commands
Table 139 mac-authentication Command Summary (continued)
COMMAND
mac-authentication nameprefix
<name-string>
mac-authentication password
<name-string>
mac-authentication password-
type <static|mac-address>
mac-authentication timeout <1-
3000>
no mac-authentication
no mac-authentication timeout
interface port-channel <port-
list>
mac-authentication
no mac-authentication
mac-authentication trusted-
vlan <vlan-list>
no mac-authentication
trusted-vlan <vlan-list>
DESCRIPTION
Sets the prefix appended to the MAC address before it is
sent to the RADIUS server for authentication. The prefix can
be up to 32 printable ASCII characters.
Sets the password sent to the RADIUS server for clients using
MAC authentication. The password can be up to 32
printable ASCII characters.
Sets the password type (stattic or mac-address) for the
MAC authentication password.
<static>:
specify using the mac-authentication password
<name-string> command.
<mac-address>:
address as the password.
Specifies the amount of time before the Switch allows a
client MAC address that fails authentication to try and
authenticate again.
This settings is superseded by the mac-aging-time
command.
Disables MAC authentication on the Switch.
Sets the MAC address entries learned via MAC
authentication to never age out.
Enables a port or a list of ports for configuration.
Enables MAC authentication via a RADIUS server on the
port(s).
Disables MAC authentication via a RADIUS server on the
port(s).
Sets the clients in the specified VLAN(s) to access the
port(s) and the connected networks without MAC
authentication.
Removes the trusted VLAN settings.
Ethernet Switch CLI Reference Guide
199
Have the Switch send the password you
Have the Switch use the client MAC
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13