Mrstp Commands - ZyXEL Communications XS3800-28 Cli Reference Manual

Use these commands to configure MRSTP on the Switch.
56.1 MRSTP Overview
The Switch allows you to configure multiple instances of Rapid Spanning Tree Protocol (RSTP) as defined
in the following standard.
• IEEE 802.1w Rapid Spanning Tree Protocol
See Chapter 82 on page 307
information on MSTP commands.
56.2 Command Summary
The following section lists the commands for this feature.
Table 149 Command Summary: mrstp
COMMAND
show mrstp <tree-index>
spanning-tree mode
<RSTP|MRSTP|MSTP>
mrstp <tree-index>
mrstp <tree-index> priority <0-
61440>
mrstp <tree-index> hello-time <1-
10> maximum-age <6-40> forward-
delay <4-30>
mrstp interface <port-list>

MRSTP Commands

for information on RSTP commands and
DESCRIPTION
Displays multiple rapid spanning tree configuration for
the specified tree.
tree-index: this is a number identifying the RSTP tree
configuration.
Note: The number of MRSTP tree configurations
Specifies the STP mode you want to implement on the
Switch.
Activates the specified MRSTP configuration.
Sets the bridge priority of the Switch for the specified
MRSTP configuration.
Sets the Hello Time, Maximum Age and Forward Delay
values on the Switch for the specified MRSTP
configuration.
Activates MRSTP on the specified ports.
Ethernet Switch CLI Reference Guide
212
C
H A P T E R
Chapter 57 on page 215
supported differs by model. Refer to your
User's Guide for details.
56
for
M P
E 3
C 13
C 13
C 13
C 13
C 13