ZyXEL Communications XS3800-28 Cli Reference Manual page 373

The following table describes the labels in this screen.
Table 241 show system-information
LABEL
Product Model
System Name
System Mode
System Contact
System Location
System up Time
Ethernet Address
Bootbase Version
ZyNOS F/W Version
Config Boot Image
Current Boot Image
RomRasSize
This example displays run-time SFP (Small Form Factor Pluggable) parameters on ports 9 (the first SFP port
0, with an SFP transceiver installed) and 10 (the second SFP port 1, no SFP transceiver installed) on the
Switch. You can also see the alarm and warning thresholds for temperature, voltage, transmission bias,
transmission and receiving power as shown.
sysname# show sfp 9-10
SFP
Part Number
Series Number
Revision
Transceiver
Temperature(C) Alarm(80.00 ~ 0.00), Warning(75.00 ~ 5.00), Current(38.00)
Voltage(V) Alarm(3.50 ~ 3.10), Warning(3.45 ~ 3.15), Current(3.37)
Tx Bias(mA) Alarm(100.05 ~ 1.00), Warning(90.04 ~ 2.00), Current(5.25)
Tx Power(dBm) Alarm(-2.99 ~ -8.98), Warning(-3.49 ~ -8.48), Current(-6.05)
Rx Power(dBm) Alarm(-2.99 ~ -18.01), Warning(-3.49 ~ -17.39), Current(-4.24)
SFP
Not Available
Chapter 106 Additional Commands
DESCRIPTION
This field displays the model name.
This field displays the system name (or hostname) of the Switch.
This field displays standalone or stacking mode
This field displays the name of the person in charge of this Switch. Use the snmp-server
command to configure this. See
This field displays the geographic location of this Switch. Use the snmp-server
command to configure this. See
This field displays how long the switch has been running since it last started up.
This field displays the MAC address of the Switch.
This field displays the bootbase version the Switch is running.
This field displays the firmware version the Switch is running.
This field displays whether the Switch is configured to run firmware 1 or 2 when it next
starts.
This field displays whether the Switch is running firmware 1 or 2.
This field displays how much ROM is used.
: 0
: SFP-SX-DDM
: S081113001132
: V1.0
: 1000BASE-SX
: 1
Ethernet Switch CLI Reference Guide
373
Chapter 80 on page 296.
Chapter 80 on page 296.