ZyXEL Communications XGS3700-24HP Release Note/Manual Supplement
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Network Router
  5. XGS3700-24HP
  6. Release note/manual supplement
ZyXEL Communications XGS3700-24HP Release Note/Manual Supplement

ZyXEL Communications XGS3700-24HP Release Note/Manual Supplement

Hide thumbs
Table of Contents

Advertisement

Quick Links

ZyXEL XGS3700-24HP V4.20(AAGD.1)C0
Release Note/Manual Supplement
Date: May. 18, 2015
This document describes the features in the XGS3700-24HP for its 4.20(AAGD.1)C0 release.
Support Platforms:
ZyXEL XGS3700-24HP V4.20(AAGD.1)C0 supports models: ZyXEL XGS3700-24HP
Version:
ZyNOS Version
Bootbase Version
Default Bootbase Setting:
ZyNOS Version
Bootbase Version
Serial Number
Vendor Name
Product Model
ZyNOS Code Model
ZyNOS ROM address
System Type
First MAC Address
Last MAC Address
MAC Address Quantity
Default Country Code
Boot Module Debug Flag
CPLD Version
RomFile Version
RomFile Checksum
ZyNOS Checksum
SNMP MIB level & OID
Main Feature Bits
Other Feature Bits
02 45 00 00 00 00 00 00-00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00-00 13 00 00 00 00
Features:
1.
Complies with IEEE802.3, IEEE802.3u, IEEE802.3z/ab, IEEE802.3x, IEEE802.3ae,
IEEE802.3af, IEEE802.3at, IEEE802.3az, IEEE802.1p
2.
24 fixed 100/1000Mbps auto-sensing, auto-MDIX on all RJ45
3.
4 SFP+ 10G ports (two will be occupied in stacking mode)
(Port 27/28 on XGS3700-24/24HP and Port 51/52 on XGS3700-48/48HP)
4.
PWM Fan Module
5.
Local console
6.
1 10/100Mbps auto-sensing, auto-MDIX , Management RJ45 port
7.
Fan-speed monitoring
8.
16K layer 2 MAC addresses table
: V4.20(AAGD.1) | 05/05/2015 15:3:14
: V2.00 | 07/21/2014 15:38:56
V4.20(AAGD.1) | 05/05/2015 15:3:14
V2.00 | 07/21/2014 15:38:56
Xxxxxxxxxxxxxxx
ZyXEL
XGS3700-24HP
GS3700
bdc00000
14
0019CB000001
0019CB00001E
30
FF
00
N/A
00
0ced
5471
060102030405060708091011121314151617181920
C0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XGS3700-24HP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ZyXEL Communications XGS3700-24HP

Summary of Contents for ZyXEL Communications XGS3700-24HP

  • Page 1 ZyXEL XGS3700-24HP V4.20(AAGD.1)C0 Release Note/Manual Supplement Date: May. 18, 2015 This document describes the features in the XGS3700-24HP for its 4.20(AAGD.1)C0 release. Support Platforms: ZyXEL XGS3700-24HP V4.20(AAGD.1)C0 supports models: ZyXEL XGS3700-24HP Version: ZyNOS Version : V4.20(AAGD.1) | 05/05/2015 15:3:14 Bootbase Version : V2.00 | 07/21/2014 15:38:56...
  • Page 2 1K IP address table 64 routing path 1K multicasting group 2MB packet buffer. IEEE 802.1D transparent bridging Port-based VLAN (Standalone Only) IEEE 802.1Q tag-based VLAN Protocol-based VLAN IP subnet based VLAN GVRP VRRP IEEE802.1ad Double tagging Selective QinQ MAC filtering Management through console, telnet, SNMP or web management Firmware upgrade by FTP/TFTP TFTP client / server...
  • Page 3 DHCPv6: client and relay ICMPv6 IPv6 Path MTU NDP: host and router IPv6 address stateless auto-configuration: host and router IPv6 static route Guest VLAN Password encryption User access right PPPoE IA and option 82 ECMP 384 ACL 64 Policy route Configurable ARP learning mode Recovery mechanism for error-disabled port/reason.
  • Page 4 [IPv6] Switch doesn’t support IPv6 address transfer if port movement. [Workaround] - Waiting for MAC address timeout - Clear MAC address for the host entry. [LACP] When RSTP is enabled with ring topology, LACP can’t be activated at the same ports.

  • Page 5: Table Of Contents

    [Workaround] - Delete the slot configuration before you insert the different model to stacking system. - Strongly to recommend user to use the same model to replace stacking member. Bug fix: [LLDP] Fix the incompatibility issue with Microsoft Windows OS 8.1 LLDP that will cause the switch loss of management.
  • Page 6 32. ZON neighbor per-port maximum clients Firmware Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP FW: C:\>...
  • Page 7 420AAGD1C0.rom rom-0 ftp> bye Where  User name : just press admin  Password : the management password, 1234 by default  420AAGD1C0.rom : the name of configuration file you want to upgrade rom-0 : the internal configuration name in XGS3700-24HP...
  • Page 8 ZyXEL XGS3700-24HP V4.20(AAGD.0)C0 Release Note/Manual Supplement Date: Jan. 22, 2015 This document describes the features in the XGS3700-24HP for its 4.20(AAGD.0)C0 release. Support Platforms: ZyXEL XGS3700-24HP V4.20(AAGD.0)C0 supports models: ZyXEL XGS3700-24HP Version: ZyNOS Version : V4.20(AAGD.0) | 01/21/2015 17:9:17 Bootbase Version : V2.00 | 07/21/2014 15:38:56...
  • Page 9 10. 64 routing path 11. 1K multicasting group 12. 2MB packet buffer. 13. IEEE 802.1D transparent bridging 14. Port-based VLAN (Standalone Only) 15. IEEE 802.1Q tag-based VLAN 16. Protocol-based VLAN 17. IP subnet based VLAN 18. GVRP 19. VRRP 20. IEEE802.1ad Double tagging 21.
  • Page 10 70. ICMPv6 71. IPv6 Path MTU 72. NDP: host and router 73. IPv6 address stateless auto-configuration: host and router 74. IPv6 static route 75. Guest VLAN 76. Password encryption 77. User access right 78. PPPoE IA and option 82 79. ECMP 80.
  • Page 11 Known Issue: [ACL] A filtering rule with discard source action will always filter packets regardless of source MAC or destination MAC. [STP] When using three different spanning tree protocols (RSTP+MSTP+MRSTP) on the whole network, the network will loop. [Workaround] - Use the same STP protocol on the whole network. [IPv6] Port movement of IPv6 address is not supported currently.

  • Page 12: Mac Filtering Entry

    [Log] When switch reboot, the coldstart/warmstart trap will send after bootup 4 minutes. [IPv6] With ipv6 static route setting and save. After switch reboot, ipv6 traffic cannot be routing by ipv6 static route. [Workaround] Re-Configure ipv6 static route. When enter “show running-config”, switch will display slowly if stacking member up [CLI] to 8 due to port number increase.

  • Page 13: Ip Routing Domain

    32. ZON neighbor per-port maximum clients Firmware Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows:...
  • Page 14  ras-0 : the internal firmware name in XGS3700-24HP Configuration Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP configuration: C:\>...
  • Page 15 ZyXEL XGS3700-24HP V4.10(AAGD.6)C0 Release Note/Manual Supplement Date: Sep. 16, 2014 This document describes the features in the XGS3700-24HP for its 4.10(AAGD.6)C0 release. Support Platforms: ZyXEL XGS3700-24HP V4.10(AAGD.6)C0 supports models: ZyXEL XGS3700-24HP Version: ZyNOS Version : V4.10(AAGD.6) | 09/16/2014 15:40:7 Bootbase Version : V1.00 | 03/27/2013 21:18:22...
  • Page 16 10. 64 routing path 11. 1K multicasting group 12. 2MB packet buffer. 13. IEEE 802.1D transparent bridging 14. Port-based VLAN 15. IEEE 802.1Q tag-based VLAN 16. Protocol-based VLAN 17. IP subnet based VLAN 18. GVRP 19. VRRP 20. IEEE802.1ad Double tagging 21.
  • Page 17 70. DHCPv6: client and relay 71. ICMPv6 72. IPv6 Path MTU 73. NDP: host and router 74. IPv6 address stateless auto-configuration: host and router 75. IPv6 static route 76. Guest VLAN 77. Password encryption 78. User access right 79. PPPoE IA and option 82 80.

  • Page 18: Igmp Filtering Entry

    29. Static route max entry Firmware Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP FW: C:\>...
  • Page 19  ras-0 : the internal firmware name in XGS3700-24HP Configuration Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP configuration: C:\>...
  • Page 20 ZyXEL XGS3700-24HP V4.10(AAGD.5)C0 Release Note/Manual Supplement Date: Jul. 18, 2014 This document describes the features in the XGS3700-24HP for its 4.10(AAGD.5)C0 release. Support Platforms: ZyXEL XGS3700-24HP V4.10(AAGD.5)C0 supports models: ZyXEL XGS3700-24HP Version: ZyNOS Version : V4.10(AAGD.5) | 07/18/2014 17:22:38 Bootbase Version : V1.00 | 03/27/2013 21:18:22...
  • Page 21 10. 64 routing path 11. 1K multicasting group 12. 2MB packet buffer. 13. IEEE 802.1D transparent bridging 14. Port-based VLAN 15. IEEE 802.1Q tag-based VLAN 16. Protocol-based VLAN 17. IP subnet based VLAN 18. GVRP 19. VRRP 20. IEEE802.1ad Double tagging 21.
  • Page 22 70. DHCPv6: client and relay 71. ICMPv6 72. IPv6 Path MTU 73. NDP: host and router 74. IPv6 address stateless auto-configuration: host and router 75. IPv6 static route 76. Guest VLAN 77. Password encryption 78. User access right 79. PPPoE IA and option 82 80.
  • Page 23 Bug fix: 1. [FCIR_20131205_0001] [FCIR_20131216_0001] Power off and power on the device during system reboot process, all port will be inactive in show running. It seems that rom file is broken. 2. [FCIR_20131216_0002] Errorlog message is not correct for hardware monitor FAN error 3.

  • Page 24: Mvr Vlan Entry

    29. Static route max entry Firmware Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP FW: C:\>...
  • Page 25 Configuration Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP configuration: C:\> ftp <XGS3700-24HP IP address>...
  • Page 26 ZyXEL XGS3700-24HP V4.10(AAGD.4)C0 Release Note/Manual Supplement Date: Mar. 31, 2014 This document describes the features in the XGS3700-24HP for its 4.10(AAGD.4)C0 release. Support Platforms: ZyXEL XGS3700-24HP V4.10(AAGD.4)C0 supports models: ZyXEL XGS3700-24HP Version: ZyNOS Version : V4.10(AAGD.4) | 03/31/2014 11:34:37 Bootbase Version : V1.00 | 03/27/2013 21:18:22...
  • Page 27 10. 64 routing path 11. 1K multicasting group 12. 2MB packet buffer. 13. IEEE 802.1D transparent bridging 14. Port-based VLAN 15. IEEE 802.1Q tag-based VLAN 16. Protocol-based VLAN 17. IP subnet based VLAN 18. GVRP 19. VRRP 20. IEEE802.1ad Double tagging 21.

  • Page 28: Policy Route

    70. DHCPv6: client and relay 71. ICMPv6 72. IPv6 Path MTU 73. NDP: host and router 74. IPv6 address stateless auto-configuration: host and router 75. IPv6 static route 76. Guest VLAN 77. Password encryption 78. User access right 79. PPPoE IA and option 82 80.

  • Page 29: Dhcp Option 82 Profile

    29. Static route max entry Firmware Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP FW: C:\>...
  • Page 30 Configuration Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP configuration: C:\> ftp <XGS3700-24HP IP address>...
  • Page 31 ZyXEL XGS3700-24HP V4.10(AAGD.3)C0 Release Note/Manual Supplement Date: Mar. 28, 2014 This document describes the features in the XGS3700-24HP for its 4.10(AAGD.3)C0 release. Support Platforms: ZyXEL XGS3700-24HP V4.10(AAGD.3)C0 supports models: ZyXEL XGS3700-24HP Version: ZyNOS Version : V4.10(AAGD.3) | 03/28/2014 15:29:42 Bootbase Version : V1.00 | 03/27/2013 21:18:22...
  • Page 32 10. 64 routing path 11. 1K multicasting group 12. 2MB packet buffer. 13. IEEE 802.1D transparent bridging 14. Port-based VLAN 15. IEEE 802.1Q tag-based VLAN 16. Protocol-based VLAN 17. IP subnet based VLAN 18. GVRP 19. VRRP 20. IEEE802.1ad Double tagging 21.
  • Page 33 70. DHCPv6: client and relay 71. ICMPv6 72. IPv6 Path MTU 73. NDP: host and router 74. IPv6 address stateless auto-configuration: host and router 75. IPv6 static route 76. Guest VLAN 77. Password encryption 78. User access right 79. PPPoE IA and option 82 80.
  • Page 34 [FCIR_20130624_0001] When switch reply LLDP MED PDU and then port link down, system crash. 5. [FCIR_20130709_0002] DUT crash after sending into a fake DHCP packet 6. [FCIR_20130712_0001] DUT crash when setup DHCP option profile 7. [FCIR_20130715_0001] DUT crash when setup H/W monitor voltage limit 8.

  • Page 35: Static Route Max Entry

    29. Static route max entry Firmware Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP FW: C:\>...
  • Page 36  ras-0 : the internal firmware name in XGS3700-24HP Configuration Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP configuration: C:\>...
  • Page 37 ZyXEL XGS3700-24HP V4.10(AAGD.2)C0 Release Note/Manual Supplement Date: May. 16, 2013 This document describes the features in the XGS3700-24HP for its 4.10(AAGD.2)C0 release. Support Platforms: ZyXEL XGS3700-24HP V4.10(AAGD.2)C0 supports models: ZyXEL XGS3700-24HP Version: ZyNOS Version : V4.10(AAGD.2) | 05/16/2013 10:38:34 Bootbase Version : V1.00 | 03/27/2013 21:18:22...
  • Page 38 10. 512 routing path 11. 1K multicasting group 12. 2MB packet buffer. 13. IEEE 802.1D transparent bridging 14. Port-based VLAN 15. IEEE 802.1Q tag-based VLAN 16. Protocol-based VLAN 17. IP subnet based VLAN 18. GVRP 19. VRRP 20. IEEE802.1ad Double tagging 21.
  • Page 39 70. DHCPv6: client and relay 71. ICMPv6 72. IPv6 Path MTU 73. NDP: host and router 74. IPv6 address stateless auto-configuration: host and router 75. IPv6 static route 76. Guest VLAN 77. Password encryption 78. User access right 79. PPPoE IA and option 82 80.
  • Page 40 13. Due to the radius server IP problem (set wrong/inexistence radius server IP),SNMPc should send trap(s) ”RADIUS server not reachable” for each time user try to re-logging through Radius server (not only display the trap once) 14. When create policy route and the destination interface include DUT’s management IP, then telnet or use web to DUT is fail 15.
  • Page 41 18. [DHCP] Create DHCP Relay VLAN per port setting, then backup configuration fails and CLI will hang up. 19. [DHCP] Create DHCP Relay VLAN per port setting, then CLI pop error message when show running-configuring. 20. [MIB-zyxelIpsg] When using SilverCreek to test the zyArpFreeze (OID: 1.3.6.1.4.1.890.1.15.3.33.1.1), DUT will crash.
  • Page 42 54. [Trap] In system group , it should not support external alarm. 55. [MIB-zyxelHwMonitor] The zyHwMonitorTemperatureIndex (OID: 1.3.6.1.4.1.890.1.15.3.26.1.2.1.1) value doesn’t math the Web via SNMPc. 56. [PoE] When all PDs connect to device and reboot device, CLI will pop error message during reboot process.
  • Page 43 80. [MIB-zyxelMldSnoopingProxy] When using SilverCreek to test the zyMldSnoopingProxyDownstreamVlanMaxResponseTime (OID: 1.3.6.1.4.1.890.1.15.3.51.3.7.1.3), it will pop error message - ”Agent returned wrong syntax for ZYXEL-MLD-SNOOPING-PROXY-MIB:zyMldSnoopingProxyDownstreamVlanMaxRespo nseTime.4094. Expected syntax of ZYXEL-MLD-SNOOPING-PROXY-MIB:zyMldSnoopingProxyDownstreamVlanMaxRespo nseTime.4094 to be INTEGER, not Gauge”. 81. [MIB-zyxelMldSnoopingProxy] When using SilverCreek to test the zyMldSnoopingProxyDownstreamVlanPortLeaveTimeout (OID: 1.3.6.1.4.1.890.1.15.3.51.3.8.1.3), it will pop error message - ”Agent returned wrong syntax for...
  • Page 44 100. [MIB-zyxelPrivateVlan] The zyPrivateVlanAssociatedPrimaryVid (OID: 1.3.6.1.4.1.890.1.15.3.68.1.1.1.2) can’t be set via SNMPc or MIB Browser. 101. [MIB-zyxelPrivateVlan] When using SilverCreek to test the zyPrivateVlanAssociatedPrimaryVid (OID: 1.3.6.1.4.1.890.1.15.3.68.1.1.1.2), it will pop error message - ”Agent returned out of range integer value 0 is outside the range of (1..4096) for ZYXEL-PRIVATE-VLAN-MIB:zyPrivateVlanAssociatedPrimaryVid.4094”.
  • Page 45 124. [IPv6] In ipv6 prefix, prefix in VLAN 1 should be consistent with prefix in VLAN 2. 125. [MIB-zyxelTrtcm] The zyTrtcmPortDscpProfile (OID: 1.3.6.1.4.1.890.1.15.3.85.1.3.1.4) can’t set any value via SNMPc or MIB Browser. 126. [MIB-zyxelSubnetBasedVlan] The zySubnetBasedVlanMaxNumberOfVlans (OID: 1.3.6.1.4.1.890.1.15.3.80.1.3) access-type should be ”read-only”, not ”read-write”. 127.
  • Page 46 153. [Mirror] In mirror test, the learned packet will broadcast to other ports. The behavior is abnormal. Execute MAC-Flush, DUT will be ok. 154. [Mirror] Non Monitor port can receive the traffic in the mirrored port. 155. [IPv6 ND] Send 8K ND packets into Device then check Neighbor table in web page, device will hang up or crash.
  • Page 47 185. DUT can not be reboot (model: GS3700-48) 186. [SNMP-dot1qVlan] When the dot1qVlanStaticRowStatus (OID: 1.3.6.1.2.1.17.7.1.4.3.1.5) is 2 (notInService) and deleting via MIB, it will fail. 187. [MIB-traceRouteMIB] When using SilverCreek to test traceRouteMIB (OID: 1.3.6.1.2.1.81), DUT will hang up. 188. [MIB-CFM] The dot1agCfmMepDbTable (OID: 1.3.111.2.802.1.1.8.1.7.3) index is error. 189.
  • Page 48 214. [syslog] set device over night, found temperature was out of its limit range (abnormal) when show logging (Dec 24 23:43:43 EM system: Board_1 temperature value 192 is out of its limit range) 215. [Private VLAN] In show VLAN counter, community VLAN and isolated VLAN also will count into primary VLAN.
  • Page 49 240. [SNMP-zyxelArp] Using ”Get” way to get zyStaticArpRowStatus (OID: 1.3.6.1.4.1.890.1.15.3.11.1.4.1.5) will fail, but using ”Next-Get” is OK. 241. [MIB-zyxelArp] When using SilverCreek to test the zyArpPort (OID: 1.3.6.1.4.1.890.1.15.3.11.2.1.1.4), it will show ”Agent returned out of range enumeration 1 is not a known value for ZYXEL-ARP-MIB:zyArpPort.192.168.1.10.1” error message. 242.
  • Page 50 265. [Rmirror] In web page, create Rmirror VLAN ruler without reflect port, show running will display mirror-port ”” in Rmirror VLAN ruler. 266. [Rmirror] In web page, it must enable mirror port and direction, then work. But, in cli, it only configure mirror port direction directly.
  • Page 51 291. [MIB-zyxelIpv6StaticRoute] When setting the zyIpv6StaticRouteNextHopIpAddress (OID: 1.3.6.1.4.1.890.1.15.3.37.1.2.1.5) to unexist IP address, it will pop error message but the value can be set OK. 292. [Radius] When radius server only exists in server 2, device will send ”Radius server 1 is unreachable”...
  • Page 52 319. [IP Load Sharing] In sip & dip criteria mode, the L3 traffic (sip: fixed, dip: increment) only forward to one port, could not load balance. The issue only occurs in 48 port device. 320. [CFM] In spanning tree topology, execute linktrace from device 3 to device 1 (eth cfm link re 7003 MEP 1003 ma 3 md 1), the ”chassis-id”...
  • Page 53 348. [VLAN_Web] Try to display index 1 (Advanced Application >VLAN > index 1), web disconnected 349. [VRRP] VRRP can’t response ping in different routing domain. 350. [Rmirror] When monitor-port in local mirror and connected-port in Rmirror get conflict, then erase running, the Rmirror still could not work correctly. (In egress direction, the connected port should be double tagged packets, not original packets).

  • Page 54: Mac Filtering Entry

    29. Static route max entry Firmware Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows:...
  • Page 55  ras-0 : the internal firmware name in XGS3700-24HP Configuration Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP configuration: C:\>...
  • Page 56 ZyXEL XGS3700-24HP V4.10(AAGD.1)C0 Release Note/Manual Supplement Date: Mar. 29, 2013 This document describes the features in the XGS3700-24HP for its 4.10(AAGD.1)C0 release. Support Platforms: ZyXEL XGS3700-24HP V4.10(AAGD.1)C0 supports models: ZyXEL XGS3700-24HP Version: ZyNOS Version : V4.10(AAGD.1) | 03/28/2013 21:11:31 Bootbase Version : V1.00 | 03/27/2013 21:18:22...
  • Page 57 10. 512 routing path 11. 1K multicasting group 12. 2MB packet buffer. 13. IEEE 802.1D transparent bridging 14. Port-based VLAN 15. IEEE 802.1Q tag-based VLAN 16. Protocol-based VLAN 17. IP subnet based VLAN 18. GVRP 19. VRRP 20. IEEE802.1ad Double tagging 21.
  • Page 58 70. DHCPv6: client and relay 71. ICMPv6 72. IPv6 Path MTU 73. NDP: host and router 74. IPv6 address stateless auto-configuration: host and router 75. IPv6 static route 76. Guest VLAN 77. Password encryption 78. User access right 79. PPPoE IA and option 82 80.
  • Page 59 8. [Syslog] Due to the radius server IP problem (set wrong/inexistence radius server IP),SNMPc should send trap(s) ”RADIUS server not reachable” for each time user try to re-logging throu Radius server (not only display the trap once)? 9. [Policy Route] When create policy route, then subnet A ping access IP_B fails.? 10.

  • Page 60: Igmp Filtering Entry

    29. Static route max entry Firmware Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP FW: C:\>...
  • Page 61  ras-0 : the internal firmware name in XGS3700-24HP Configuration Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP configuration: C:\>...
  • Page 62 ZyXEL XGS3700-24HP V4.10(AAGD.0)C0 Release Note/Manual Supplement Date: Feb. 26, 2013 This document describes the features in the XGS3700-24HP for its 4.10(AAGD.0)C0 release. Support Platforms: ZyXEL XGS3700-24HP V4.10(AAGD.0)C0 supports models: ZyXEL XGS3700-24HP Version: ZyNOS Version : V4.10(AAGD.0) | 2/26/2013 17:20:39 Bootbase Version : V1.00 | 02/26/2013 17:19:43...
  • Page 63 10. 512 routing path 11. 1K multicasting group 12. 2MB packet buffer. 13. IEEE 802.1D transparent bridging 14. Port-based VLAN 15. IEEE 802.1Q tag-based VLAN 16. Protocol-based VLAN 17. IP subnet based VLAN 18. GVRP 19. VRRP 20. IEEE802.1ad Double tagging 21.
  • Page 64 70. DHCPv6: client and relay 71. ICMPv6 72. IPv6 Path MTU 73. NDP: host and router 74. IPv6 address stateless auto-configuration: host and router 75. IPv6 static route 76. Guest VLAN 77. Password encryption 78. User access right 79. PPPoE IA and option 82 80.

  • Page 65: Mvr Vlan Entry

    29. Static route max entry Firmware Upgrade: The XGS3700-24HP uses FTP to upgrade firmware in run-time through its built-in FTP server. You can use any FTP client (for example, ftp.exe in Windows) to upgrade XGS3700-24HP. The upgrade procedure is as follows: Upgrade XGS3700-24HP FW: C:\>...

  • Page 66: User : Admin Password

    Where  User name : just press admin  Password : the management password, 1234 by default  410AAGD0C0.rom : the name of configuration file you want to upgrade  Rom-0 : the internal configuration name in XGS3700-24HP...

Table of Contents