www.zyxel.com
4.1.3 How to configure MRSTP on the switch?
Overview
It's an extension to RSTP to provide multiple ring extensions in one switch. Each
spanning tree operates independently with its own bridge information. Protect
network for self-recovery when a link goes down
Topology:
Note: In the scenario, switch A is configured with MRSTP and connected with 4
different RTP divided & configured to tree 1,2,3,4.
1. Select multiple rapid spanning tree and click Apply to run MRSTP.
Figure 1, Advanced Application > Spanning Tree Protocol > Configuration
39/100