ABS Diagnostic Flow Table
Refer to the following pages for the details of each step.
Step
1
1) Perform "Customer Complaint Analysis".
2) Perform "Problem Symptom Confirmation".
3) Perform "Diagnostic Trouble Code Check, Record and
Clearance".
Is there any malfunction DTC?
2
1) Perform "DRIVING TEST".
Is trouble symptom identified?
3
1) Check diagnostic trouble code.
Is it malfunction code?
4
1) Inspect and repair referring to applicable diagnostic trouble
code table in this section.
2) Perform "FINAL CONFIRMATION TEST" after cleared
DTC.
Does trouble recur?
5
1) Inspect and repair referring to "DIAGNOSIS" in "BRAKES"
section.
2) Perform "FINAL CONFIRMATION TEST".
6
1) Check intermittent troubles referring to "INTERMITTENT
AND POOR CONNECTION" in "GENERAL INFORMA-
TION" section and related circuit of trouble code recorded
in Step 2.
2) Perform "FINAL CONFIRMATION TEST" after cleared
diagnostic trouble code.
Does trouble recur?
7
1) Perform "Diagnostic Trouble Code Check, Record and
Clearance".
Is there any malfunction code?
Action
ANTILOCK BRAKE SYSTEM (ABS) 5E-9
Yes
Go to Step 2.
Go to Step 5.
Go to Step 3.
Go to Step 6.
Go to Step 4.
Go to Step 5.
Go to Step 7.
End.
–
Go to Step 7.
End.
Go to Step 2.
Go to Step 5.
No
–