SSANGYONG Y200 Manual page 2141

Hide thumbs Also See for Y200:

Table of Contents

Draining the Water From Fuel Filter

1. Place the water container under the fuel filter.

2. Turn the drain plug (2) to "A" direction to drain the water.

3. Press priming pump until all water is drained, then turn

the drain plug to "B" direction to tighten it.

Be careful not to be injured by surrounding

equipment during the working procedures.

4. Press the priming pump until it becomes rigid.

5. Start the engine and check the conditions.

6. Clear the fault code of ECU with scan 100.

If the priming pump is not properly operated, air may

get into the fuel line. It may cause starting problem

or fuel system problem. Make sure to perform the

job in step 4.

DI ENG SM - 2004.4

EFFECTIVE DATE

AFFECTED VIN

Chapters

Table of Contents