SSANGYONG Y200 Manual page 2108

Function Description
Cylinder Head
• Cylinder head coolant outlet port is integrated into intake manifold. (in front of cylinder #1)
: Improved shape and gasket material to prevent coolant from leaking
• In OM 600 engine, coolant inflows through the heater line rear section (cylinder #4 and #5) of cylinder head. However,
in D27DT engine, coolant inflows from cylinder block through oil cooler (refer to coolant flows layout in previous
page).
: It prevents cooling efficiency from decreasing due to coolant separation between cylinder #4 and #5.
• In OM 600 engine, the cooling fan is installed with water pump, however, in case of D27DT engine, it is connected to
water pump with an additional pulley.
COOLING SYSTEM
DI ENG SM - 2004.4
From cylinder head
From reservoir
6
1 2
DI06-5
Intake Manifold
Coolant Outlet Port
Y220_06003
4
5
From heater
3
Y220_06004
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN