SSANGYONG Y200 Manual page 2166

DI07-30
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
25. Remove the guide rail pins (lower and upper) with a special
tool.
Y220_07058
26. Install the special tool (1) for holding HP pump sprocket,
unscrew the mounting bolts and remove the sprocket. At
this time, rotate the crankshaft 30° to 45° counterclockwise
to remove the sprocket.
Tightening torque
Y220_07059
27. Remove the center nut for HP pump shaft.
Tightening torque
Y220_07060
28. Pull out the HP pump bearing with a special tool.
Notice
Be careful not to damage the bearing.
Y220_07061
20 Nm ± 90°
65 ± 5 Nm
FUEL SYSTEM
DI ENG SM - 2004.4