Subaru Legacy 2004 Service Manual page 2475

AUTOMATIC TRANSMISSION (DIAGNOSTICS)
6. Subaru Select Monitor
A: OPERATION
1. READ DIAGNOSTIC TROUBLE CODE
(DTC)
1) Prepare the Subaru Select Monitor kit.
2) Connect the diagnosis cable to Subaru Select
Monitor.
3) Insert the cartridge to Subaru Select Monitor.
<Ref. to 5AT(diag)-6, PREPARATION TOOL, Gen-
eral Description.>
4) Connect the Subaru Select Monitor to data link
connector.
(1) Data link connector is located in the lower
portion of the instrument panel (on the driver's
side).
(1) Data link connector
(2) Connect the diagnosis cable to data link
connector.
Subaru Select Monitor
NOTE:
Do not connect scan tools except for Subaru Select
Monitor.
5) Turn ignition switch to ON (engine OFF) and turn
on the Subaru Select Monitor.
AT-00338
6) On the «Main Menu» display screen, select the
{Each System Check} and press the [YES] key.
7) On the «System Selection Menu» display
screen, select the {Transmission} and press the
[YES] key.
8) Press the [YES] key after the information of
transmission type is displayed.
9) On the «Transmission Diagnosis» display
screen, select the {Diagnosis Code(s) Display} and
press [YES] key.
NOTE:
• For details concerning operation procedure, re-
fer to the "SUBARU SELECT MONITOR OPERA-
TION MANUAL".
• For details concerning DTCs, refer to the List of
AT-00339
Diagnostic Trouble Code (DTC). <Ref. to 5AT(di-
ag)-30, List of Diagnostic Trouble Code (DTC).>
2. READ CURRENT DATA
1) On the «Main Menu» display screen, select the
{Each System Check} and press the [YES] key.
2) On the «System Selection Menu» display
screen, select the {Transmission} and press the
[YES] key.
(1)
3) Press the [YES] key after the information of
transmission type is displayed.
4) On the «Transmission Diagnosis» display
screen, select the {Current Data Display & Save}
and press the [YES] key.
5) On the «Transmission Diagnosis» display
screen, select the {Data Display} and press the
AT-01712
[YES] key.
6) Using the scroll key, scroll the display screen up
or down until the desired data is shown.
5AT(diag)-16
(A) Power switch
(A)
AT-00341