Subaru Legacy 2004 Service Manual page 2453

23) Install the extension case and intermediate
case. <Ref. to 5AT-72, INSTALLATION, Extension
Case & Intermediate Case.>
24) Install the control valve body. <Ref. to 5AT-58,
INSTALLATION, Control Valve Body.>
25) Install the converter case assembly into trans-
mission case assembly. <Ref. to 5AT-84, INSTAL-
LATION, Converter Case.>
26) Install the air breather hose. <Ref. to 5AT-69,
INSTALLATION, Air Breather Hose.>
27) Install the ATF filter pipe. <Ref. to 5AT-60, IN-
STALLATION, ATF Filter.>
28) Install the oil charge pipe with O-ring. <Ref. to
5AT-70, INSTALLATION, Oil Charge Pipe.>
29) Install the torque converter assembly. <Ref. to
5AT-71, INSTALLATION, Torque Converter As-
sembly.>
30) Install the transmission assembly into vehicle.
<Ref. to 5AT-42, INSTALLATION, Automatic
Transmission Assembly.>
C: DISASSEMBLY
1. INPUT CLUTCH PACK ASSY
1) Remove the front sun gear.
2) Remove the snap ring, and then remove the
front carrier.
AT Main Case
3) Remove the input clutch assembly from rear in-
ternal gear.
D: ASSEMBLY
1. INPUT CLUTCH PACK ASSY
1) Assemble the input clutch assembly to rear inter-
nal gear.
2) Install the front carrier, and then install the snap
ring.
AT-02007
3) Install the front sun gear.
AT-02008
5AT-105
AUTOMATIC TRANSMISSION
AT-02009
AT-02009
AT-02008
AT-02007