Subaru Legacy 2004 Service Manual page 2449

ST1 18762AA000 COMPRESSOR SPECIAL
TOOL
ST2 18765AA000 COMPRESSOR SUPPORT
ST3 18763AA000 COMPRESSOR SHAFT
ST3
25) Remove the spring retainer.
26) Remove the return spring.
27) Remove the snap ring of reverse brake piston.
ST1 18762AA000 COMPRESSOR SPECIAL
TOOL
ST2 18765AA000 COMPRESSOR SUPPORT
ST3 18763AA000 COMPRESSOR SHAFT
AT Main Case
28) Apply compressed air.
ST1
29) Remove the reverse brake piston.
ST2
B: INSTALLATION
AT-02000
1) Install the reverse brake piston.
NOTE:
Apply ATF onto the piston sliding surface.
ST1 18762AA000 COMPRESSOR SPECIAL
ST2 18765AA000 COMPRESSOR SUPPORT
ST3 18763AA000 COMPRESSOR SHAFT
2) Install the return spring.
AT-02001
3) Install the spring retainer and snap ring.
ST1 18762AA000 COMPRESSOR SPECIAL
ST2 18765AA000 COMPRESSOR SUPPORT
AT-02002
5AT-101
AUTOMATIC TRANSMISSION
AT-02004
AT-02005
TOOL
AT-02002
TOOL