Subaru Legacy 2004 Service Manual page 2457

3) Insert the manual plate and parking rod.
(A) Bolt
(B) Range select lever
(C) Manual plate
(D) Parking rod
4) Insert the spring pin to manual plate.
5) Install the oil pan and control valve assembly.
<Ref. to 5AT-58, INSTALLATION, Control Valve
Body.>
6) Install the pitching stopper bracket.
Tightening torque:
!
41 N m (4.2 kgf-m, 30.4 ft-lb)
7) Insert the transmission connector to the stay.
8) Install the air breather hose.<Ref. to 5AT-69, IN-
STALLATION, Air Breather Hose.>
9) Install the torque converter assembly. <Ref. to
5AT-71, INSTALLATION, Torque Converter As-
sembly.>
10) Install the transmission assembly into vehicle.
<Ref. to 5AT-42, INSTALLATION, Automatic
Transmission Assembly.>
C: INSPECTION
Make sure the manual lever and detention spring
are not worn or otherwise damaged.
Transmission Control Device
AT-00306
AT-00305
5AT-109
AUTOMATIC TRANSMISSION