Subaru Legacy 2003 Service Manual page 3411

POWER ASSISTED SYSTEM (POWER STEERING)
9. Reservoir Tank
A: REMOVAL
1. EXCEPT 3.0 L AND TURBO MODEL
1) Drain fluid from the reservoir tank.
2) Disconnect pipe D from return hose and suction
hose from oil pump.
CAUTION:
• Do not allow fluid from the hose end to come
into contact with pulley belt.
• To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
(1) Suction hose
(2) Pipe D
(3) Return hose
3) Remove reservoir tank from bracket by pulling it
upwards.
RESERVOIR TANK
( 1 )
( 2 )
( 3 )
PS-00242
2. 3.0 L AND TURBO MODEL
1) Drain fluid from the reservoir tank.
2) Disconnect return hose and suction hose from
reservoir tank.
CAUTION:
• Do not allow fluid from the hose end to come
into contact with pulley belt.
• To prevent foreign matter from entering the
hose, cover the open ends of them with a clean
cloth.
(1) Suction hose
(2) Return hose
3) Remove reservoir tank from bracket by pulling it
upwards.
B: INSTALLATION
1. EXCEPT 3.0 L AND TURBO MODEL
1) Install reservoir tank to bracket.
2) Connect pipes D to return hose and suction hose
to oil pump.
(1) Suction hose
(2) Pipe D
(3) Return hose
3) Feed the specified power steering fluid. <Ref. to
PS-92, Power Steering Fluid.>
PS-90
( 1 )
( 2 )
PS-00243
( 1 )
( 2 )
( 3 )
PS-00242