Subaru Legacy 2003 Service Manual page 3358

9) Press out bearing together with backing washer
using pipe of I.D. 38.5 to 39.5 mm (1.516 to 1.555
in) and press.
CAUTION:
Do not reuse removed bearing.
(1) Bearing
(2) Backing washer
(3) Oil seal
(4) Pipe
10) Remove oil seal.
CAUTION:
Do not reuse removed oil seal.
STEERING GEARBOX [LHD MODEL]
( 1 )
( 2 )
( 3 )
( 4 )
PS-00157
PS-37
POWER ASSISTED SYSTEM (POWER STEERING)
D: ASSEMBLY
1. RACK HOUSING ASSEMBLY
CAUTION:
Use only SUBARU genuine grease for gearbox.
Grease:
VALIANT GREASE M2
[Part No. 003608001, net 0.5 kg (1.1 lb)]
1) Force-fit oil seal using ST.
ST 34199AE050 INSTALLER
CAUTION:
Be careful not to damage or scratch cylinder in-
ner wall.
NOTE:
• Apply specified power steering fluid to oil seal.
• Pay special attention not to install oil seal in
wrong direction.
• Push oil seal until the stepped portion of A con-
tacts end face of B.
A
B
(1) Press
(2) Oil seal
( 1 )
ST
( 2 )
PS-00158