Subaru Legacy 2003 Service Manual page 3402

B: INSTALLATION
1. EXCEPT 3.0 L AND TURBO MODEL
1) Install oil pump to bracket.
(1) Place oil pump bracket in a vise. Tighten
bushing using a 12.7 mm (1/2") type 14- and 21-
mm box wrench until it is in contact with oil pump
mounting surface.
CAUTION:
Do not place oil pump bracket directly in the
vise; use soft pads and hold oil pump lightly to
protect the pump.
( 5 )
( 3 )
( 4 )
(1) Bushing
(2) Nut
(3) 21 mm
(4) 14 mm
(5) Bolt
(2) Tighten bolt which installs oil pump and
switch bracket to bracket.
Tightening torque:
37.3 N·m (3.8 kgf-m, 27.5 ft-lb)
OIL PUMP
( 1 )
( 2 )
PS-00135
PS-00231
POWER ASSISTED SYSTEM (POWER STEERING)
Tightening torque:
15.7 N·m (1.6 kgf-m, 11.6 ft-lb)
2) Install socket to oil pump.
Tightening torque:
6.5 N·m (0.66 kgf-m, 4.8 ft-lb)
3) Tighten bolts which install power steering pump
bracket.
Tightening torque:
22 N·m (2.2 kgf-m, 15.9 ft-lb)
PS-81
PS-00226
PS-00227
PS-00127