Subaru Legacy 2003 Service Manual page 3382

11) Using ST, clinch steering body cylinder at a
point less than 3 mm (0.12 in) from holder.
CAUTION:
Be careful not to deform holder.
ST 34099FA060 PUNCH HOLDER
ST
12) Roll vinyl tape on serration part of valve assem-
bly, and apply grease on tape surface.
(1) Vinyl tape
STEERING GEARBOX [RHD MODEL]
( 1 )
3 mm (0.12 in)
ST
PS-00319
( 1 )
PS-00320
POWER ASSISTED SYSTEM (POWER STEERING)
13) Apply grease on gear teeth of valve assembly
and attach valve assembly.
CAUTION:
• Be careful not to scratch oil seal on valve
gear teeth.
• Be careful not to scratch seal ring of valve
circumference.
( 1 )
(1) Seal ring
(2) Oil seal
14) Apply grease on oil seal circumference, press
in to plug using ST and a press. Replace plug cir-
cumference O-rings with new ones.
ST 34199AE110 PLUG OIL SEAL INSTALLER
CAUTION:
Pay attention to oil seal direction, and attaching
position.
ST
( 2 )
( 1 )
(1) Plug
(2) O-ring
(3) Oil seal
PS-61
( 2 )
PS-00321
( 3 )
PS-00322