Subaru Legacy 2003 Service Manual page 3394

2) Temporarily connect pipes C and D.
( 3 )
( 6 )
( 7 )
(1) Return hose
(2) Pressure hose
(3) Approx. 30 mm (1.18 in)
(4) Clamp E
(5) Pipe C
(6) Pipe
(7) Pipe (on gearbox side)
RHD model
PIPE ASSEMBLY
( 1 )
( 2 )
( 4 )
( 5 )
PS-00178
PS-00288
POWER ASSISTED SYSTEM (POWER STEERING)
3) Temporarily install clamp E on pipes C and D,
and tighten clamp E firmly.
CAUTION:
Ensure that the letter "8" on each clamp are di-
agonally opposite each other as shown in fig-
ure.
Tightening torque:
7.4 N·m (0.75 kgf-m, 5.4 ft-lb)
( 1 )
(1) Clamp E
(2) Pipe C
4) Tighten joint nut.
Tightening torque:
15 N·m (1.5 kgf-m, 10.8 ft-lb)
5) Connect pipe A and B.
Connect pipes A and B to four pipe joints of gear-
box. Connect upper pipe B first, and lower pipe A
second.
LHD model
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
(1) Pipe A
(2) Pipe B
PS-73
8
letter
8
letter
( 2 )
( 1 )
( 2 )
PS-00223
PS-00026