Subaru Legacy 2003 Service Manual page 3217

DIAGNOSTICS CHART WITH SELECT MONITOR
VDC (DIAGNOSTICS)
7 CHECK BATTERY SHORT OF HARNESS.
1) Turn ignition switch to ON.
2) Measure voltage between VDCCM and
chassis ground.
Connector & terminal
(F87) No. 65 (+) — Chassis ground ( − − − − ):
Is the measured value less than the speci-
fied value?
Step Value
0.5 V
VDC-244
Yes
Replace yaw rate Repair harness
and lateral G sen- between yaw rate
sor. <Ref. to VDC- and lateral G sen-
22, Yaw Rate and sor and VDCCM.
Lateral G Sensor.>
No