Subaru Legacy 2003 Service Manual page 3392

RHD model (Except 3.0 L)
( 1 )
( 4 )
(1) Pressure hose
(2) Return hose
(3) Clamp E
(4) Pipe C
(5) Pipe D
6) Disconnect pipe C·D.
LHD model
Disconnect pipe C·D from pipe (on the gearbox
side).
CAUTION:
• When disconnecting pipe C·D, use two
wrenches to prevent deformities.
• Be careful to keep pipe connections free from
foreign matter.
( 1 )
(1) Pipe C
(2) Pipe D
PIPE ASSEMBLY
( 2 )
( 3 )
( 5 )
PS-00335
( 2 )
PS-00205
PS-71
POWER ASSISTED SYSTEM (POWER STEERING)
RHD model
Remove flare nuts from control valve of gearbox
assembly, and then disconnect pipe.
CAUTION:
• When disconnecting pipes, use two wrench-
es to prevent deformities.
• Be careful to keep pipe connections free from
foreign matter.
7) Lower the vehicle.
8) Remove intake duct.
9) Remove bolt A.
Except 3.0 L and Turbo model
Disconnect pipe C from oil pump. Disconnect pipe
D from return hose.
CAUTION:
• Do not allow fluid from the hose end to come
into contact with pulley belt.
• To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with a clean cloth.
( 1 )
(1) Bolt A
(2) Pipe C
(3) Pipe D
PS-00288
( 2 )
( 3 )
PS-00221