Subaru Legacy 2003 Service Manual page 3376

12) Remove valve assembly.
CAUTION:
Be careful not to scratch seal ring.
( 1 )
( 2 )
(1) Valve ASSY
(2) Seal ring
13) Remove holder using a 32 mm wrench or ad-
justable wrench.
CAUTION:
Discard old holder and replace with new one.
STEERING GEARBOX [RHD MODEL]
PS-00299
PS-00300
PS-55
POWER ASSISTED SYSTEM (POWER STEERING)
14) Install ST on valve side of rack and press outer
side oil seal out.
ST 34099FA030 INSTALLER & REMOVER
CAUTION:
• Block pipe connection of steering body to
prevent fluid from flowing out.
• Do not allow rack to come in contact with in-
ner wall of cylinder. Otherwise, cylinder wall
may be scratched, resulting in oil leaks.
• Remove holder and rack as a unit.
• Check rack and steering body for bends or
cracks; replace as required.
• Discard oil seal after removal and replace
with new ones.
(1) Rack piston
(2) Outer side oil seal
ST
( 1 )
( 2 )
PS-00301