Subaru Legacy 2003 Service Manual page 3395

POWER ASSISTED SYSTEM (POWER STEERING)
RHD model
Connect pipes A and B to four pipe joints of gear-
box. Connect upper pipe A first, and lower pipe B
second.
Tightening torque:
T1: 20 N·m (2.0 kgf-m, 14.5 ft-lb)
T2: 24 N·m (2.4 kgf-m, 17.4 ft-lb)
( 1 )
T2
( 2 )
(1) Pipe A
(2) Pipe B
LHD model
(1) High-pressure hose
PIPE ASSEMBLY
T1
PS-00336
(2) No interference is allowed
between hoses.
6) Install jack-up plate.
7) Connect battery ground cable.
8) Feed the specified fluid.
NOTE:
Never start the engine before feeding the fluid; oth-
erwise vane pump might be seized up.
( B )
( A )
PS-74
( 1 )
( 2 )
( 3 )
(3) Clearance between crossmember
and pipe: 3 - 8 (0.12 - 0.31)
PS-00179