Configure Notification Settings - Polycom RealPresence 1800 Administration Manual

To Ping a network entity from the Collaboration Server:
1 In RMX Manager, go to Administration > Tools > Ping.
2 Modify or complete the following fields:
Ping Parameters
Field
IP Version
IP Address
3 Click Ping.
The Ping request is sent to the IP Address of the Collaboration Server entity. The Answer is either
OK or FAILED.

Configure Notification Settings

The Collaboration Server can display notifications when:
● A new Collaboration Server user connects to the MCU.
● A new conference is started.
● Not all defined participants are connected to the conference or when a single participant is connected.
● A change in the MCU status occurs and an alarm is added to the alarms list.
A welcome message is displayed to the Collaboration Server user upon connection.
To configure the notifications:
1 In RMX Manager, go toSetup > Notification Settings.
The following notification options are displayed.
Notification Settings Parameters
Field
New Connection
New Conference Created
Conference Not Full
Welcome Message
Active Alarms Update
Fault List Updated
Polycom, Inc.
Description
Select IPv4 or IPv6 from the drop-down menu.
Enter the IP Address of the network entity to ping.
Description
Notification of a new user/administrator connecting to the Collaboration Server.
New conference has been created.
The conference is not full and additional participants are defined for the
conference.
A welcome message after user/administrator logon.
Updates you of any new alarm that occurred.
Updates you when the faults list is updated (new faults are added or existing
faults are removed).
Administration and Utilities
145