Polycom RealPresence 1800 Administration Manual page 350

● Recording link participants do not trigger this feature (as there's already a recording indication),
however, site names is sent over the recording link.
The playback link acts exactly the opposite - The link triggers site name display, but the site name is
not sent over the playback link video.
To Enable and Disable this Polycom Lab Feature
To enable/disable site name popup display:
1 Right-click on a CP Only or Mixed CP and AVC conferencing profile, and select Profile Properties.
2 Select the Layout Indications tab.
3 In the Textual site name display area (shown below), determine:
 Whether to enable/disable site name display upon participant joining the conference.
 Whether to enable/disable site name display upon participant leaving the conference.
 The site name display Duration.
4 Click OK to save settings.
Prerequisites
● This feature is applicable only to AVC endpoints, and to CP Only and Mixed CP and SVC
conferences.
● All user interface pertaining to this feature appear only if in the dialog below:
 Polycom Lab features are enabled in general.
 The feature check-box is selected.
Using Video Clips for IVR Services
Polycom Lab features are new technology innovations that may not have undergone all levels of formal
testing. We encourage you to try them out, but because they are not fully tested or supported, please don't
deploy them in production environments.
Polycom Lab features are experimental and may or may not become official features in a future release.
This brief specification documents the following Polycom Lab Feature.
Feature Name:
Polycom, Inc.
Using Video Clips for IVR Services
Appendix - Polycom Lab Features
329