Polycom RealPresence 1800 Administration Manual page 428

For more information see Polycom Unified Communications Deployment Guide for Microsoft
Environments.
4 Set the ITP_CERTIFICATION System Flag to YES.
When set to NO (default), this flag disables the Telepresence features in the Conference Profile.
5 Set the MIN_TIP_COMPATIBILITY_LINE_RATE System Flag.
The MIN_TIP_COMPATIBILITY_LINE_RATE System Flag determines the minimum line rate at
which a Profile can be TIP enabled.
CTS version 1.7 requires a minimum line rate of 1024 kbps and will reject calls at lower line rates,
therefore the System Flag value must be 1024 or higher.
For more information see
6 If required, manually add and set the FORCE_720P_2048_FOR_PLCM_TIP System Flag using one
of the following values:
FORCE_720P_2048_FOR_PLCM_TIP (Default) - Forces HD 720p video resolution and a line rate
of 2048kbps for all Polycom TIP-enabled endpoints that connect to the TIP-enabled Telepresence
conference. This setting is the recommended setting.
FORCE_2048_FOR_PLCM_TIP - Forces a line rate of 2048kbps for all Polycom TIP-enabled
endpoints connecting to the TIP-enabled Telepresence conference.
NO_FORCE - No forcing is applied, and Polycom TIP-enabled endpoints can connect to the
TIP-enabled Telepresence conference at any line rate or resolution.
7 Reset the Collaboration Server.
8 Register the DMA to the Lync server
For more information see Polycom Unified Communications Deployment Guide for Microsoft
Environments, Configure a DMA System SIP Peer for the Lync Server.
9 Register the ITP endpoints to the Lync server.
For more information see the Polycom Unified Communications Deployment Guide for Microsoft
Deployment Process for Polycom Immersive Telepresence Systems.
Environments,
Polycom, Inc.
Appendix - Polycom Open Collaboration Network (POCN)
Modifying System Flags.
407