Polycom RealPresence 1800 Administration Manual page 239

General System Flags
Flag Name
VSW_RATE_TOLERANCE_PEREC
ENT
WRONG_NUMBER_DIAL_RETRIE
S
802.1x Authentication System Flags
Flag Name
802_1X_CERTIFICATE_MODE
802_1X_CRL_MODE
Polycom, Inc.
Description
Determines the percentage of bandwidth that can be
deducted from the required bandwidth to allow
participants to connect to the conference.
For example, a value of 20 will allow a participant to
connect to the conference if the allocated line rate is
up to 20% lower than the conference line rate (or
between 80% to 100% of the required bandwidth).
Default value: 0
Range: 0 - 75
The number of redial attempts for a wrong
destination number or a wrong destination number
time-out.
Default value: 3
Range: 0 - 5
A flag value of 0 means that no redials are
attempted.
Description
Determines whether one TLS certificate is retrieved from the
Certificate Repository for all IP services or if multiple
certificates will be retrieved, one for each IP service.
Default value: ONE_CERTIFICATE
Possible values: ONE_CERTIFICATE,
MULTIPLE_CERTIFICATE
If the flag value is:
• ENABLED - Forces CRL checking. The system fails the
connection request if the certificate has been revoked or if
there is no CRL.
• OPTIONAL - The system fails the connection request if the
certificate is revoked but does not fail the connection request
if there is no CRL.
• DISABLED - Does not check the CRL and does not fail the
connection request based on the CRL content.
Default value: DISABLED
Possible values: ENABLED, OPTIONAL, DISABLED
System Flags
Platform Add?
HW Yes
HW/VE Yes
218