Polycom RealPresence 1800 Administration Manual page 155

SNMPv3 - Traps
Field
Trap Destination
11 Click Add to add a new Manager terminal.
Depending on the SNMP Trap Version selected, one of two New Trap Destination dialog opens.
12 Define the following parameters:
SNMPv3 - Traps
Field
IP Address
Enable Trap
Inform
Community Name
Polycom, Inc.
Description
This box lists the currently defined IP addresses of the Manager terminals to
which the message (trap) is sent.
IP
Community Name
User Name
Authentication
Protocol
Privacy Protocol
Engine ID
Description
Enter the IP address of the SNMP trap recipient.
An Inform is a Trap that requires receipt confirmation from the entity
receiving the Trap. If the Engine ID field (Version 3) is empty when Enable
Trap Inform has been selected, the Engine ID is set by the Client.
Enter the Community Name of the manager terminal used to monitor the
MCU activity
Enter the IP address of the SNMP trap
recipient.
Enter the Community Name of the
manager terminal used to monitor the
MCU activity
Enter the name of the user who is to have
access to the trap.
Enter the authentication protocol: MD5 or
SHA.
Enter the privacy protocol: DES or AES.
Enter an Engine ID to be used for both
the Agent and the Trap.
Default: Empty
Administration and Utilities
All Versions
Version 1
and Version
2
Version 3
Version
1,2,3
1, 2
134