Polycom RealPresence 1800 Administration Manual page 351

Release Feature is Being Tested In:
Level of Testing Performed To Date:
To find out more about this Polycom Lab feature or provide feedback on this feature, contact Polycom
Support.
Description of Feature
When connecting a conference running on Polycom RealPresence Collaboration Server via an Entry
Queue, a still slide is used, which up until version 8.7 could be replaced by a different still slide.
From version 8.7.1, provided Polycom Lab features are enabled, and the motion slides feature is activated,
Polycom allows:
● Using a motion slide (video clip) instead of a still slide.
● Replacing the default motion slide Polycom supplies (within both installation and upgrade packages),
which is named General_Polycom_Slide_Motion, with a different video slide.
● Receiving motion slides from the DMA for external IVRs.
Note: Audio Prompt for Video Slide
The audio prompt to the video slide is taken from the IVR associated with it.
Video Slides Guidelines
● Since TIP endpoints are sometimes prone to encountering problems with customizing IVR slides, it
is possible to block video slides for TIP endpoints via the ENABLE_MOTION_SLIDE_TO_TIP_EPS
system flag (see below), in which case these endpoints cannot view video clips.
● Video clips size is limited to 5M to prevent memory overflow. Thus, up to 10 motion slides per a local
IVR may be loaded by the Administrator user.
● Bit rates are preset as described in the table below.
Bit Rate values per Resolution
Resolution
CIF
SD
HD720
HD1080
Polycom, Inc.
Polycom® RealPresence® Collaboration Server, V8.7.1
 None
 Feature Unit Tested
 Feature Unit and Product Regression Tested
 Full Feature Unit, Product Regression, and Solution Tested
Frame Rate
30
30
30
30
Appendix - Polycom Lab Features
Preset Bit Rate (Kbps)
384
768
1024
2048
330