Polycom RealPresence 1800 Administration Manual page 305
Collaboration server
Hide thumbs
Also See for RealPresence 1800:
- Administrator's manual (1113 pages) ,
- Getting started manual (70 pages) ,
- Hardware manual (18 pages)
Table of Contents
Advertisement
Active Alarms
Alarm Text
Bios version is not compatible with
Ultra Secure Mode.
Card configuration event
Card failed to switch to Enhanced
Secure Mode
Card failure
Card not found
Card not responding
Cards wrong file's mode
Central signaling component failure
Central Signaling indicating Faulty
status
Central Signaling indicating Recovery
status
Central Signaling startup failure
Conference Encryption Error
Polycom, Inc.
Alarm Description
The current BIOS version is not compatible with Ultra Secure Mode
(ULTRA_SECURE_MODE=YES).
Note: Applicable to Collaboration Servers 2000/4000/1800
Note: Applicable to Collaboration Servers 2000/4000
Card failure occurred when the system was set to Ultra Secure Mode
(ULTRA_SECURE_MODE=YES).
Note: Applicable to Collaboration Servers 2000/4000/1800
Possible reasons for the card failure:
•
Resetting Card
•
Resetting component
•
Unknown shelf error
•
Unknown card error
Note: Applicable to Collaboration Servers 2000/4000
This occurs when the system does not receive an indication about the
card (since it does not exist...) usually when the card was removed from
the MCU and the system did not have a chance to recalculate it
resources.
Note: Applicable to Collaboration Servers 2000/4000
Possible reasons for the card not responding:
•
No connection with MPM card.
•
No connection with the Switch.
Note: Applicable to Collaboration Servers 2000/4000
Note: Applicable to Collaboration Servers 2000/4000
Possible explanations:
•
Central signaling component failure; unit type:
[NonComponent\CSMngnt\CSH323\ Polycom® ContentConnect™IP]
•
Central signaling component failure; unit type: (invalid:
[NonComponent\CSMngnt\CSH323\ ContentConnect IP])
•
Central signaling component failure - Invalid failure type. Unit id: [id],
Type: [NonComponent\CSMngnt\CSH323\ContentConnect IP],
Status: [Ok\Failed\Recovered]
•
Central signaling component failure - Invalid failure type
Central signaling failure detected in IP Network Service.
Central Signaling component is down.
Active Alarms
284
Advertisement
Table of Contents
