Polycom RealPresence 1800 Administration Manual page 446

RealPresence Collaboration Server (RMX) 2000
RealPresence Collaboration Server (RMX) 4000
To connect to the Alternate Management Network:
1 Connect the cable between the relevant RealPresence Collaboration Server port and the LAN port
configured on the workstation.
2 Start the RMX Web Client application on the workstation, by (entering http://169.254.192.10 the
Control Unit IP Address) in the browser's address line and press Enter.
The RealPresence Collaboration Server Welcome Screen dialog is displayed.
3 Enter the administrator's Username and Password, and click Login.
The RMX Web Client starts and the Collaboration Server can be managed in the same manner as if
you had logged on to the Management Network.
Connecting the Collaboration Server via Modem
(2000/4000)
Remote access to the Collaboration Server's Alternate Management Network is supported via an external
PSTN <=> IP modem.
To connect via modem to the Alternate Management Network perform the following procedures:
1 Install the RMX Manager – The web client enables direct access to the Collaboration Server for
support purposes.
2 Configure the modem – Assign the modem an IP address on a specific subnet in the Alternate
Management Network.
3 Create a dial-up connection – Using Windows New Connection Wizard.
4 Connect to the Collaboration Server – Via the RMX Manager.
Configure the Modem
Configure the modem with the following settings.
● IP address – near 169.254.192.nn
Polycom, Inc.
Appendix - Direct Connection to the RealPresence Collaboration Server
425