Setting The Port Usage Threshold - Polycom RealPresence 1800 Administration Manual
Collaboration server
Hide thumbs
Also See for RealPresence 1800:
- Administrator's manual (1113 pages) ,
- Getting started manual (70 pages) ,
- Hardware manual (18 pages)
Table of Contents
Advertisement
The actual number of occupied or free resources can also be displayed by moving the cursor over the
columns of the bar graph. Moving the cursor over the Video bar displays the following view:
The Port Gauge in the Status Bar show the numbers as they appear in the resource report. In the following
example, 20 of the 400 system resources are shown as occupied.
Setting the Port Usage Threshold
The Collaboration Server can be set to alert the administrator to potential port capacity shortages. A capacity
usage threshold can be set as a percentage of the total number of licensed ports in the system. When the
threshold is exceeded, a System Alert is generated. The default port capacity usage threshold is 80%.
The administrator can monitor the MCU port capacity usage via the Port Gauge in the Status Bar of the
RMX Manager. The Port Usage Gauge displays for the Collaboration Server:
● The total number of Video ports in the system.
● The number of Video ports in use.
● The High Port Usage threshold.
Polycom, Inc.
Administration and Utilities
131
Advertisement
Table of Contents
