Polycom RealPresence 1800 Administration Manual page 349

General Guidelines
● The site name display utilizes the message overlay mechanism, thus both are enabled/disabled
simultaneously, and conform to identical settings, such as color, font size, and horizontal location.
● Message overlay is replaced by site name upon participant joining/leaving for the specified duration,
after which the message overlay display is renewed for static message overlay.
Also, site name display is replaced by message overlay until the next participant joining/leaving.
The same applies to encrypted message overlay.
Site Name Display Triggering
● Both SVC and audio participants, although incapable of viewing the site name, trigger their site name
display at the AVC endpoints.
● Content participants do not trigger this feature.
● Lync clients RealConnect-ed to conferences, do not trigger this feature.
● ITP, non-TIP, room triggers this feature, but is considered as a single participant, even in scenarios
where the ITP room includes multiple endpoints. In the ITP room itself, the site name is displayed only
on its main screen.
TIP enabled conferences are incompatible with this feature.
● Cloud Axis clients trigger display of site name, thus might view duplicate display of site name; one
due to the Web client features, the other, due to this feature.
● When MCUs are cascaded, neither the cascading link, nor the cascaded MCU participants, trigger
display of site name at the other MCU participants.
● WebRTC clients trigger this feature, however WebRTC endpoints do not display the site name
message.
Polycom, Inc.
Appendix - Polycom Lab Features
328