Polycom RealPresence 1800 Administration Manual page 218

General System Flags
Flag Name
ITP_CROPPING
IVR_MESSAGE_VOLUME
IVR_MUSIC_VOLUME
IVR_ROLL_CALL_SUPPRESS_OP
ERATOR
Polycom, Inc.
Description
If the conference is set to telepresence mode,
cropping of the image is done according to this flag
value:
Default value: ITP
Possible values:
• ITP (default) - No cropping of left-right, symmetric
cropping of top-bottom.
• CP - Symmetric cropping of both left-right and
top-bottom areas (separately calculated).
• MIXED - Symmetric cropping of left-right areas
and asymmetric cropping of top-bottom areas
(16% from top, 84% of bottom).
Note: If the flag was added with no value, and the
conference is set to telepresence mode, the left-right
areas aren't cropped, and the top-bottom areas are
asymmetrically cropped (16% from top, 84% from
bottom).
The volume of IVR messages varies according to
the value of this flag.
Default values: 6
Possible values:
0 – disables playing the IVR messages
1 – lowest volume
10 – highest volume
Note:
• It is not recommended to disable IVR messages
by setting the flag value to 0.
• System reset is not required for flag changes to
take effect.
The volume of the IVR music played when a single
participant is connected to the conference varies
according to the value of this flag.
Default value: 5
Possible values:
0 – disables playing the music
1 – lowest volume
10 – highest volume
Note: System reset is not required for flag changes
to take effect.
When set to YES, the MCU suppresses the
entry/exit tone when the operator participant joins or
leaves the conference.
Default value: NO
Possible values: YES/NO
System Flags
Platform Add?
HW/VE No
HW/VE No
HW/VE No
HW/VE No
197