Polycom RealPresence 1800 Administration Manual page 380

System Operation Description for Deployment and Monitoring
The MMCU infrastructure operates mostly independently, though at its starting point, it depends on the
Administrator intervention. In addition, the Administrator may intervene at some points, to effect a change
in Soft Blade operation.
The table below describes the Soft Blade operation, and the states in which the Administrator can intervene
to affect it, in the form of a State Transition Machine (STT).
Soft Blade Monitoring States
Soft Blade State State Meaning
Authentication Phase
Pend Soft Blade awaits
Authentication Administrator
password at the Main
MCU.
Soft Blade Pend Soft Blade awaits
Authentication Administrator
password at Soft
Blade.
Rejected Soft Blade awaits the
Administrator next
action.
Operational Phase
Installing The Soft Blade
installation is
launched
Initializing Initializing the Soft
Blade
Polycom, Inc.
Soft Blade/Administrator Operation
While in State
Administrator performs Accept, and
enters password.
Administrator performs Reject.
Administrator performs Delete.
Note: If the console wizard is active at
the Soft Blade, the Soft Blade
re-appears in System Monitor (Salt
ping). Use Reject for complete deletion.
Administrator performs Accept, and
enters password.
Administrator performs Reject.
Administrator performs Delete. ***
Administrator performs Accept, and
enters password.
Administrator Delete.
Installation is successfully completed.
Installation fails.
Initialization is successfully completed.
Initialization fails.
Appendix - Modular MCU
Soft Blade New State
Soft Blade Pend
Authentication
Rejected
Soft Blade erased **
Installing
Rejected
Soft Blade erased **
Soft Blade Pend
Authentication
Soft Blade erased **
Initializing
Faulty
Ready
Faulty (ping)
Disconnected (no ping)
359