Polycom RealPresence 1800 Administration Manual page 413

Procedure 4: Configure a TIP Enabled Profile on the
Collaboration Server
TIP enabled profiles must be used for the Entry Queues and Meeting Rooms defined on the Collaboration
Server. (Different Profiles can be assigned to Entry Queues and Meeting Rooms, however they must be TIP
enabled.) When TIP is enabled in the Profile, Gathering Settings and Message Overlay options are disabled.
1 Create a New Profile for the Meeting Room. For more information see
Conferencing Profiles.
2 In the New Profile - General tab, set the Line Rate to a value of at least that specified for the
MIN_TIP_COMPATIBILITY_LINE_RATE System Flag in Procedure 1.
Polycom, Inc.
Appendix - Polycom Open Collaboration Network (POCN)
Defining AVC CP
392