Polycom RealPresence 1800 Administration Manual page 352

● Users should attempt slide customization for inactive time intervals (i.e. with no active or scheduled
conferences) due to the heaviness of the process of the clip customization to MCU video format.
● Video clips for customization are characterized by:
 Format - avi, mp4, mov, mpeg only
 Resolution - 1080p30 only
 Duration - 10 seconds. Up to 30 seconds are accepted, though it is truncated to 10 seconds.
Due to clips cyclic playing, it is recommended to harmonize the clip end and beginning.
 Effects - Avoid light effects to prevent imperfect translation to MCU video format.
System Flags
System Flags for Motion Slide blocking for TIP Endpoints
Flag Name
ENABLE_MOTION_SLIDE_TO_
TIP_EPS
To Enable and Disable this Polycom Lab Feature
See the last prerequisite below.
Prerequisites
● This feature requires CIF as a minimum resolution supported by the endpoint.
● The media type supported by the endpoint may be H.263, H.264 (Base Profile only), RTV, and TIP.
H.261 and H.264 High Profile endpoints are not supported.
● All user interface pertaining to this feature appear only if in the dialog below:
 Polycom Lab features are enabled in general.
 The feature check-box is selected.
Polycom, Inc.
Flag Description
Enables displaying motion slides to TIP endpoints.
This system flag required a manual addition to be modified, and if modified,
value takes effect immediately (i.e. not requires reset) for new conferences.
Range: YES (default), NO
Note: Set this flag to NO if you experience difficulties in viewing motion slides
in TIP endpoints connected to your Collaboration Server.
Appendix - Polycom Lab Features
331