Polycom RealPresence 1800 Administration Manual page 250

Modify Resolution Flags
Flag Name
MAX_CP_RESOLUTION
MAX_MS_SVC_RESOLUTION
MAX_RTV_RESOLUTION
MINIMUM_FRAME_RATE_THRESHOLD_FOR_
SD
Polycom, Inc.
Description
Determines the maximum CP Resolution of the system. Apply
the flag value to the system during First Time Power-on and
after a system upgrade.
Default value: HD1080
Possible values:
• HD1080 - High Definition at 60 fps
• HD1080 - High Definition at 30 fps
• HD720 - High Definition at 60 fps
• HD - High Definition at 30 fps
• SD30 - Standard Definition at 30 fps
• SD15 - Standard Definition at 15 fps
• CIF - CIF resolution
Minimizes the resource usage by overriding the default
resolution selection and limiting it to a lower resolution.
Operates independently from the MAX_RTV_RESOLUTION
system flag allowing differing selection of maximum
resolutions for the MS SVC and RTV protocols.
Default value: AUTO
Possible values: AUTO, CIF, VGA, HD720, HD1080
Enables you to override the RealPresence Collaboration
Server resolution selection and limit it to a lower resolution.
This minimizes the resource usage to 1 or 1.5 video
resources per call instead of 3 resources.
Default value: AUTO
Possible values: AUTO, QCIF, CIF, VGA, or HD720
Prevents low quality and low frame rate video from being sent
to endpoints by ensuring that an SD channel is not opened at
frame rates below the specified value.
Default value: 15
Range: 0 -30
System Flags
229