Polycom RealPresence 1800 Administration Manual page 295

Event Fields for Events 108, 112 - OPERATOR MOVE PARTY TO CONFERENCE,OPERATOR ATTEND PARTY
TO CONFERENCE
Field Description
Net Interface Type The type of network interface between the participant and the MCU, as follows:
0 - ISDN
2 - H.323
5 - SIP
H243 Password The H.243 password, or an empty field "" if there is no password.
Chair Not supported.
Always contains the value 0.
Video Protocol The video protocol, as follows:
1 - H.261
2 - H.263
3 - H.264*
4 - H.264
255 - Auto
Audio Volume The broadcasting volume assigned to the participant.
The value is between 1 (lowest) and 10 (loudest).
Undefined Type The participant type, as follows:
0 - Defined participant. (The value in the formatted text file is "default".)
2 - Undefined participant. (The value in the formatted text file is "Unreserved participant ".)
Node Type The node type, as follows:
0 - MCU
1 - Terminal
Bonding Phone Note: This field is only relevant to ISDN (audio/video) participants.
Number
The phone number for Bonding dial-out calls.
Video Rate Note: This field is only relevant to IP participants.
The video rate in units of kilobits per second.
A value of 4294967295 denotes auto, and in this case, the rate is computed by the MCU.
IP Address Note: This field is only relevant to IP participants.
The IP address of the participant.
An address of 4294967295 indicates that no IP address was specified for the participant,
and the gatekeeper is used for routing. In all other cases the address overrides the
gatekeeper.
Call Signaling Port Note: This field is only relevant to IP participants.
The signaling port used for participant connection.
A value of 65535 is ignored by MCU.
Polycom, Inc.
Call Detail Records
274