Procedure 9: Configure Ivr Settings - Polycom Collaboration Server (RMX) 1500 Deployment Manual

RealPresence Collaboration Server (RMX) 1500/2000/4000 Deployment Guide for Maximum Security Environments
3
4
5
6

Procedure 9: Configure IVR Settings

Perform this procedure if a password is to be used to access the conference, otherwise skip.
1
1-62
Table 1-19 802.1x Authentication - Configuration
Field
User
Password
(EAP-MD5, PEAPv0
and MSCHAPv2 only)
When 802.1x Authentication is configured for all NICs, click OK.
A warning message is displayed:
Click OK.
The RMX is disconnected from the network.
Disconnect the RMX's LAN cables from the existing network and re-connect them to the
802.1x Authentication-enabled network.
Login to the RMX from the 802.1x Authentication-enabled network.
In the RMX Management pane, click IVR Services.
The IVR Services list opens.
Enter the User name that the RMX will use to register with the
802.1x Authentication Server. This must be the RMX's DNS name
and can be up to 256 characters.
If the Domain Name (DC) field was completed in the Certificate
Request, the User must be:
<Common Name (DNS)>@<Domain Name (DC)> as set out in
the Certificate Request.
Enter the Password, that the RMX will use to register with the
802.1x Authentication Server. Up to 256 Unicode characters can be
used. The Password is always displayed as four asterisks.
Description
Polycom, Inc.