Polycom RealPresence 1800 Administration Manual page 429

10 Register Lync Clients to the Lync server.
For more information see the relevant Lync documentation.
11 Register DMA to the CUCUM server
For more information see the Polycom Unified Communications Deployment Guide for Cisco
Environments, Using a Polycom DMA System in a Cisco Environment.
12 Register CTS1000 and CTS3000 endpoints to the CUCUM server
For more information see the relevant Cisco documentation.
13 Register ITP endpoints to the CUCM server.
For more information see the Polycom Unified Communications Deployment Guide for Cisco
Direct Registration of Polycom Telepresence Systems with the Cisco Unified
Environments,
Communications Manager.
14 Register HDX endpoints to the DMA as Gatekeeper
For more information see the Polycom® DMA™ 7000 System Operations Guide.
15 Open MLA to configure ITP Layouts
MLA (Multipoint Layout Application) is required for managing CTS 3XXX layouts whether Polycom
TPX, RPX or OTX systems are deployed or not. MLA is a Windows® application that allows
conference administrators to configure and control video layouts for multipoint calls involving
Polycom Immersive Telepresence (ITP) systems.
For more information see Polycom Unified Communications Deployment Guide for Cisco
Environments.
16 Configure a TIP Enabled Profile on the Collaboration Server.
a Create a New Profile for the Meeting Room.
For more information see
b In the New Profile - General tab, set the Line Rate to a value of at least that specified for the
MIN_TIP_COMPATIBILITY_LINE_RATE System Flag in
MIN_TIP_COMPATIBILITY_LINE_RATE System
Polycom, Inc.
Appendix - Polycom Open Collaboration Network (POCN)
Defining New Profiles.
Procedure 1: Set the
Flag.
408