Overlay A Custom Logo On Conference Displays; Configure Required System Flags - Polycom RealPresence 1800 Administration Manual
Collaboration server
Hide thumbs
Also See for RealPresence 1800:
- Administrator's manual (1113 pages) ,
- Getting started manual (70 pages) ,
- Hardware manual (18 pages)
Table of Contents
Advertisement
To integrate the RealPresence Collaboration Server with the RealPresence Resource
Manager system:
1 If not already done, add the MCU(s) to the RealPresence Resource Manager system. See the
RealPresence Resource Manager Operations Guide for more information.
2 If your organization uses the RealPresence Resource Manager system Global Address Book for
conference and endpoint management, add a user account on the RealPresence Resource
Manager that the RealPresence Collaboration Server can use as its machine integration account.
See the RealPresence Resource Manager Operations Guide for more information.
3 Write down the user name and password for the machine integration account. You will need this
information for configuring the required system flags. See
Overlay a Custom Logo on Conference Displays
You can add a custom logo to the conferencing display for your organization's video conferences. The
custom logo must meet the following specifications:
● File type must be .jpg, .jpeg, or .bmp
● File size must be no more than 1 megabyte.
● Image resolution must be no more than 256 pixels x256 pixels
● Image area (width * height) must not be smaller than 64 pixels x 64 pixels
To add a custom logo as a conference overlay:
1 In RMX Manager, go to RMX Management > Rarely Used > Conference Profiles.
2 In the Conference Profiles pane, double click on the profile to edit
3 Select the Layout Indications tab.
4 Enable the Custom Logo checkbox.
5 Select the appropriate Logo Position. The options are identical to those supported for the Layout
Indication icons.
6 Click OK to save the profile.
7 In RMX Manager, go to Setup > Custom Logo
8 Browse to and select the logo image file to upload.
9 Click OK.
The RealPresence Collaboration Server validates the logo and prompts you to reboot. The server
must be rebooted before it starts using the uploaded logo.
Configure Required System Flags
In general, you configure the RealPresence Collaboration Server using the user interface. However, you will
likely need to configure the MCU for specific application and operational needs by adding predefined
RealPresence Collaboration Server system flags and setting them to the required values.
Polycom, Inc.
System Flags
for more information.
Getting Started
20
Advertisement
Table of Contents
