Change Position Of The Conference Indicators - Polycom RealPresence 1800 Administration Manual

 If you are associating this recording link to a VRR on the HARMAN Media Suite, if the Alias Type
is set to H.323 ID, enter the Media Suite IP address and the VRR number in the format:
<Media Suite IP Address>##<VRR number>
For example: If the Media Suite IP is 173.26.120.2 and the VRR number is 5555, enter
173.26.120.2##5555Define the following recording link parameters on the default IP network
service to enable recording.
 Depending on the format used to enter the information in the IP address and Alias fields, select
H.323 ID or E.164 (for multiple Recording links). E-mail ID and Participant Number are also
available.
6 Click OK.
The recording link is added to the RealPresence Collaboration Server unit.
7 In RMX Manager, go to RMX Management > Conference Profiles (
8 From the Conference Profile list, select the profile to enable for recording.
9 Right click and select Profile Properties
10 In the New Profile Properties section, go to Recording and click Enable Recording.
11 Enter the required recording parameters. For more information about these parameters, see
Recording Parameters - Not available when SVC Only conferencing mode is selected
12 Click OK.

Change Position of the Conference Indicators

During a conference, when enabled, participants see a variety of indicators that provide information about
the conference. If required, you can change the position of these indicators in the conference layout.
Conference indicators include:
● Audio and video participant indicators
During an ongoing conference, participants see the number of audio-only and video participants who
are connected to the conference. The system displays a maximum of 99 participants of each type.
The icon group is displayed for AVC endpoints only.
● Recording indicator
When Display Recording Icon is selected in either the Recording or Layout Indications tab of the
Conference Properties dialog, the recording status is indicated by the standard recording icon.
● Network quality indicator
Network quality is determined by the percentage of packet loss according to the following default
threshold values:
 Packet loss less than 1% is considered Normal
 Packet loss in the range of 1% - 5% is considered Major
 Packet loss above 5% is considered Critical.
Conference indicators, shown below, are displayed on AVC endpoints only for CP or mixed conferences.
Polycom, Inc.
Advanced Conferencing Profile Features
).
.
42