Polycom RealPresence 1800 Administration Manual page 411
Collaboration server
Hide thumbs
Also See for RealPresence 1800:
- Administrator's manual (1113 pages) ,
- Getting started manual (70 pages) ,
- Hardware manual (18 pages)
Table of Contents
Advertisement
Supported on HDX, Polycom ITP and Cisco CTS systems.
● The following content compatibility options are available:
None (TIP not enabled) – TIP endpoints cannot join the conference.
Prefer TIP - Both TIP and non-TIP endpoints can share content via H.264, base profile, using
resolution and rate as described above.
For more information see
Server.
Procedure 1: Set the MIN_TIP_COMPATIBILITY_LINE_RATE
System Flag
The MIN_TIP_COMPATIBILITY_LINE_RATE System Flag determines the minimum line rate at which an
Entry Queue or Meeting Room can be TIP enabled.
In Collaboration Servers 2000/4000/1800, CTS version 1.9.1 is required, and if CUCM is present in the
environment, a minimum line rate of 1280 kbps must be set in the conference profile. Calls at lower line rates
are rejected, therefore the System Flag value must be set to 1280 or higher.
In Collaboration Server Virtual Edition, CTS version 7 is required, and if CUCM is present in the
environment, a minimum line rate of 1024 kbps must be set in the conference profile. Calls at lower line rates
are rejected, therefore the System Flag value must be set to 1024 or higher.
HD Video Resolutions for TIP calls are determined according to the following table:
TIP HD Video Resolution by Line Rate
Line Rate
Line Rate >=3Mbps
3Mbps > Line Rate >= 936kbps
Line Rate < 936kbps
For more information see
Procedure 2: Configure Collaboration Server to Statically
Route Outbound SIP Calls to DMA or CUCM
1 In the IP Network Services Properties dialog, open the SIP Servers tab.
2 In the SIP Server field, select Specify.
3 In the SIP Server Type field, select Generic.
4 Set Refresh Registration to every 3600 seconds.
5 If not selected by default, change the Transport Type to TCP.
6 In the SIP Servers table:
a Enter the IP address of the DMA or CUCM in both the Server IP Address or Name and Server
Domain Name fields.
Polycom, Inc.
Procedure 4: Configure a TIP Enabled Profile on the Collaboration
Modifying System
Flags.
Appendix - Polycom Open Collaboration Network (POCN)
Video Resolution
HD1080p30
HD720p30
Call is dropped.
390
Advertisement
Table of Contents
